House lockouts
Re-keying
Deadbolt upgrades
Smart locks
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateFast, Reliable Car Key Replacement Across Tanner
Car key replacement in Tanner usually means one thing: your vehicle won’t start, and you’re a long way from a dealership. Our team at Belmont Lock & Key gets up the I-90 corridor to Tanner homes and acreage fast, with the cutting and programming equipment already in the truck. We handle transponder keys, remote fobs, and worn or snapped keys on-site, whether your rig is parked at a house, a cabin, or a gate off a forest-service road. Call Norm Eckley’s team at (855) 473-2502 and we’ll be rolling.
Here’s the thing about Tanner: it’s not Bellevue. The properties spread out, the drives get long, and when a key fails out here it’s not an inconvenience you can shrug off until the weekend. Your truck or car is how you get to groceries, work, and the highway. We build our Tanner runs around that reality.
Why Belmont Lock & Key Is Tanner’s Preferred Car Key Replacement Company
Tanner sits at the western foot of Snoqualmie Pass on I-90, and the 98045 ZIP stretches from rural acreage and mountain cabins down to newer commuter subdivisions. That mix means our techs see a huge range of lock and key situations in a single service area: a seized transponder key on a truck that’s been sitting through a freeze-thaw cycle, a weathered cabin door lock that hasn’t been touched since fall, a builder-grade deadbolt in a newer cul-de-sac home. We know the roads, we know the weather patterns, and we bring the right tooling for all of it.
Norm Eckley built Belmont Lock & Key around a simple idea: whoever shows up at your door should actually know the lock or the key you have, not just carry a drill. Our techs are trained and equipped to service eight lock brands across residential, commercial, and automotive work, and car key replacement is a core service, not an afterthought. That matters in Tanner, where a call might involve a transponder key on a truck and a Medeco deadbolt on a workshop, both in the same visit.
We quote the full price on the phone before a tech heads your way. No call-out surcharge added on arrival, no mystery line item. The number you’re quoted is the number on the invoice. That’s how we’ve kept Tanner customers calling us back when the next key goes bad.
Styles & brands we work with







Our Car Key Replacement Services in Tanner
Every car key job we do in Tanner starts with understanding exactly what you’re driving and what the key needs to do. Here’s what we handle day in and day out along the 98045 corridor.
Transponder Key Cutting & Programming
Most vehicles built after the late 1990s use a transponder chip embedded in the key or fob. Without the right chip programming, the key will turn but the engine won’t fire. We cut and program transponder keys on-site at your Tanner property, no tow to a dealership required. That’s a real advantage up here, where towing a vehicle back down I-90 is an expensive half-day detour.

Remote Fob Replacement & Keyless Entry
A dead fob is a common Tanner call, especially on vehicles that stay parked at cabins or tucked behind gates for weeks at a stretch. We program replacement fobs and keyless-entry remotes for most makes and models, and test the locks, panic button, and trunk release right there in your driveway. If your fob battery is just dead, we’ll tell you and save you the cost of a full replacement.

Worn or Snapped Key Extraction
Keys wear down. They round off inside the ignition cylinder, and one cold morning you turn too hard and the blade snaps. We extract broken keys without drilling the ignition whenever possible, then cut and program a fresh key from the code or the remaining piece. Non-destructive extraction matters on older trucks and rural vehicles around Tanner, where an original cylinder is worth keeping intact.

All-in-One Key Systems for Truck, Gate & Workshop
This is the call we make a lot in Tanner: a customer’s truck key, gate padlock, and workshop deadbolt are three separate keys on three separate rings, and only one of them is in the truck at any given time. We build single-key systems so one key runs the vehicle, the gate, and the outbuildings. If you’re tired of juggling keys on a remote acreage property, this is the visit to schedule.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tanner
The lock brand on your door matters, and so does the locksmith who knows it. Our Car Key Replacement team works across eight manufacturers, from everyday Schlage and Kwikset hardware to high-security Abloy and Medeco lines. On the automotive side, we carry the common transponder blanks and fobs for the vehicles we see most along the I-90 corridor, so a Tanner call usually means we have the part in the truck, not waiting on a special order. From Kwikset to Medeco, we work with what you have.
Common Car Key Replacement Problems We See in Tanner Homes
- Freeze-thaw seized ignitions. Heavy Cascade-foothill rain and snow blow through fall to spring, and keys sit parked for weeks. Moisture creeps into the ignition cylinder, freezes, and the key won’t turn. We’ve freed stuck ignitions and cut fresh keys on forest-service roads off exit 47 more times than we can count.
- Worn keys snapping in old cylinders. Older trucks and farm vehicles around Tanner often still run original pin and tumbler ignitions. The key blade rounds off slowly, then snaps under torque. We extract the broken blade without drilling and cut a new key to the factory code.
- Dead transponder fobs on stored vehicles. A cabin truck that sits for six weeks will often eat a fob battery. But sometimes the fob itself dies, and you can’t start the vehicle without it. We program replacements on-site, even up a gravel drive.
- Mismatched keys across vehicle and property. Tanner’s rural owners frequently arrive with a truck key, a gate key, and a workshop key that have never matched. We build a single key system so one key starts the truck and opens the gate and the shop, one visit, not three.
Pricing for Car Key Replacement in Tanner, WA
A standard transponder key replacement in Tanner typically runs $180 to $340, including cutting and programming on-site. Basic non-transponder key cutting for older vehicles runs lower, generally $80 to $150. Remote fobs and keyless-entry remotes add $120 to $250 depending on the vehicle and the fob type. If we’re extracting a snapped key from the ignition, expect an additional $60 to $110 for non-destructive removal. The full price is quoted on the phone before anyone is dispatched to your Tanner property, and that’s the price on the invoice. No surprise add-ons at your door. Call (855) 473-2502 for an exact quote, estimates are free.
On a country call with multiple locks, like a truck key paired with a gate rekey and a workshop deadbolt, we quote a flat per-lock price ahead of time. You’ll see the written scope before we start. That’s standard for the way we run Tanner jobs.
We Also Serve Cities Near Tanner
Our techs roll from Bellevue through the Snoqualmie Valley, so if you’re just outside Tanner, chances are we’re close. We serve North Bend, Riverbend, Wilderness Rim, and Snoqualmie regularly, and the same flat, quoted-upfront pricing applies across every run. If you’re on the fence about whether we cover your road, call and ask.
Serving Tanner, WA — Our Local Coverage Area
We’re based in the Tanner area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Car Key Replacement in Tanner
Yes. We cut and program replacement keys on-site at Tanner properties, including remote acreage and cabins well off the paved roads. If the ignition has seized from freeze-thaw moisture, we’ll free it and cut a fresh key rather than drilling. Call (855) 473-2502 and tell us what you’re driving, and we’ll bring the right blanks and programmer for your make and model. The quote you get on the phone is the price on the invoice.
Yes. Because Tanner’s cabin and acreage properties sit empty for long stretches off the I-90 corridor, our car-key calls here often pair a roadside transponder key replacement with a property rekey on the same drive. The vehicle is the only way in, so a dead fob or snapped key strands the owner far from a paved cul-de-sac. We’ll quote a flat per-lock price for the gate, the shop, and the house, and do it all in one visit, not three.
Yes. We work across eight lock manufacturers, including Schlage, Kwikset, Medeco, and Abloy, and we handle the common automotive transponder and fob brands along the I-90 corridor. One tech, one truck, and the right tools for both your ignition and your deadbolts. That’s the whole point of one company for the full lifecycle of your lock needs.
No, not unless there is no other option, and even then we’ll tell you before touching a drill. Most snapped or seized keys around Tanner come out with non-destructive extraction tools, and then we cut a fresh key to the existing cylinder so you keep the original ignition. Drilling is a last resort, not the first move. That’s a distinction that matters on older trucks and rural vehicles.
Yes. We build single-key and master-key systems for rural Tanner properties so one key starts the vehicle, opens the gate, and unlocks the workshops and outbuildings. We quote a written scope and a flat per-lock price before we start, and we do the whole job in one trip up your drive. Call (855) 473-2502 and describe your property, and we’ll tell you what’s possible and exactly what it costs.
On a forest-service road off exit 47 near Tanner, a customer’s only vehicle, an older truck, had a key that had swollen and seized in the ignition after a wet freeze-thaw stretch. We cut and programmed a fresh transponder key on-site and freed the old one without drilling the cylinder. Because we were already up the drive, we also rekeyed the workshop deadbolt and gate padlock so a single key ran the truck, the shop, and the gate. One visit, not three.
If you need car key replacement in Tanner, call Belmont Lock & Key at (855) 473-2502. Norm Eckley and our techs know the roads, the weather, and the vehicles up and down the 98045 corridor. Fast response. Right tools. Done right.
Written by Norm Eckley, Owner at Belmont Lock & Key.